Apla-Tech's answer for easy drywall finishing tools starts with the "Cannon"®. By the squeeze of the lever compounds are pushed pneumatically "by air" out to the flat coaters, nail spotters, angle heads, and for the tape-on bead products with very little effort.

You can achieve a high quality finish with feathered. Save well over 100% of hand finishing time. 25% to 40% over mechanical tools finishing rime.

Features Include:

• Ergonomically designed
• 3' standard tube. 2' to 5' tube lengths available for small to tall areas
• Polycarbonate green tinted tube allows user to see compound
• Cleans quickly
• Weighs only 9 lbs. full of lightweight compounds
• Reduces arm, shoulder, and back strain. No need to "push" tool
• Save time and money while reducing labor
• Minimum air pressure required - 10 to 35 PSI from 3/4 HP compressor
• Comes with a 50' 3/16" air hose

Features:

• Being able to travel three times further before refilling tools saves 66% filling time
• Blade tension assembly helps achieve the desired crown
• Quality of finish superior than mechanical box finish

Recommended for the first coat to fill recess. Fill "Cannon"® with thicker compound to achieve less shrinkage!

Fill coat 70 to 80 linear feet before refilling!

For fill, second or finish coat. Fill "Cannon"® with compound for a high quality finish.

When second or finish coating you travel 100 linear feet or more before refilling.

For final or skim coat.

Also travels 100 feet or more before refilling.

With the Universal Bead Tabs you can coat 90° corner bead or bull nose bead in seconds! The tabs simply attach to the coaters, you drop the pin and are ready to fill or skim coat the bead. You can realize over 50% labor savings.

3" or 4½" spotter with a full 3" "Cannon"® will coat out a house without refilling. Both will give high quality finish over nails and screws that today's drywall professional is looking for.

For first coat.

For skim coat.

With the gooseneck on the "Cannon"®, attach your angle head for "effortless" angles. You can skim coat angles with any thickness of joint compound you want. This is the easiest angle tool on Earth!