APLA-TECH, INC.
APLA-TECH, INC.

Drywall Pumps

Please call for pricing. Apla-Tech can be reached at (800) 827-3721 with any pricing or product questions.

Jr. Pump™

The Jr. Pump™ is a lightweight, cost-effective drywall pump with capabilities to quickly fill all drywall tools "pneumatically" (with air). Just set over a 5-gallon pail and hook up your compressor with the 25' hose provided. ¾ Hp compressor is all you need. Eliminate shoulder strain!

  • NO more hand pumping!
  • Disassembly (of pump) not required to clean!
  • Cleans itself!
  • Weighs only 28 pounds for easy transport!
  • Pumps thick or thin muds!
  • Comes with a water sprayer to clean tools when done!
  • Automatic taper and box filler attachment available!
  • Setting type compounds can also be used!

Apla-Pump®

The Apla-Pump® is really four tools in one!

Fill 10-gallon reservoir with compounds and mix with water. Attach either "Cannon"™ or mechanical tools to the fill valve. Tools fill in seconds, pneumatically! No need to bend down or hand pump anymore. (use ¾ Hp compressor for filling tools).

No more pails to carry or clean! Mix in reservoir and roll to desired location.

Clean up is easy! Circulating water cleans the pump. Empty the reservoir, add fresh water and attach supplied spray hose to spray clean all your tools. Includes three additional airports, a 25' air supply hose, "Cannon"™ filler, floating lid, container cover, and water hose and nozzles.

To convert to texture sprayer, attach 50' texture lines with spray gun and you're ready to texture a variety of textures! A 5-6 Hp compressor or larger is required. Additional 25' texture line can be added.

  • 35 GPM water rating!
  • Weighs about 54 lbs. when empty!
  • Rolls easily on pneumatic wheels!
  • Operates with thick or thin compounds!

Optional tube taper filler, flat box filler available.

T-Series Pump™

While having all the unique features of the smaller Apla-Pump®, the T-Series Pump™ boasts a 15-gallon reservoir which allows the finisher 50% more product to finish with between mixings. The T-Series Pump™ fills, mixes, cleans and textures just like the Apla-Pump®. This pump comes with a tools box attached to the pump frame.

To convert into a drywall sprayer, just attach the 50' texture line and spray gun and you're ready to texture.

  • 35 GPM water rating!
  • Only 66 lbs. empty!
  • Pneumatically fills all drywall tools!
  • Rolls easily on pneumatic wheels!
  • Mix in reservoir!
  • Operates 3 Cannons® at once!
  • Operates with thick or thin compounds!

Optional tube taper filler, flat box filler available.

© 1998-2004 - Apla-Tech, Inc.
Site maintained by Corporate Network Solutions, Inc.
Se Habla Español


en Español


Valid XHTML 1.1!